Salt and damp
Sea air carries salt, and salts in old plaster draw in moisture. White crystals on a wall are a sign. The cause has to be dealt with before the wall is replastered, or the new plaster fails.
Tell us about the job and your postcode. It takes a few minutes, it is free and there is no obligation.
A ceiling that needs a skim, a wall that has gone hollow, a room to replaster before decorating or a crack that keeps coming back: describe the job once and get a free quote from plasterers who work in Redcar and across Teesside.
Enter the walls, the openings and any ceiling, and choose the kind of job. It gives the weight and the number of 25 kg bags.


Redcar grew up between the sands and the steelworks, and its walls have to cope with salt, damp and a long list of old buildings.
Redcar lies 7 miles east of Middlesbrough, on the Yorkshire coast, with 37,660 people in the built-up area at the 2021 census.
Pick the day the plaster goes on, its thickness and the conditions. It gives the dates for a mist coat, for finish paint and for wallpaper.

A plastered wall is usually two coats on the brick. Knowing the layers helps to read a quote.
| Plaster | Used for | Good to know |
|---|---|---|
| Multi-finish | The finish coat, 2 to 3 mm, over a backing coat or a sound old wall | The usual skim. It sets, then is trowelled smooth |
| Board finish | A skim over plasterboard | Made for the paper face of the board |
| Bonding and backing | The first coat on brick, block or a poor wall, 8 to 11 mm | It levels the wall and gives the finish a key |
| Lime plaster | Old buildings with lime or soft brick or stone walls | Lets the wall breathe. Slower and a specialist job |
Pick what you can see. You get the likely cause, what a plasterer does and how big the job is.

Sea air carries salt, and salts in old plaster draw in moisture. White crystals on a wall are a sign. The cause has to be dealt with before the wall is replastered, or the new plaster fails.
Many seaside terraces have lime or sand and cement plaster. Gypsum over lime can trap moisture, so ask what is on the wall now and what the plasterer plans to use.
A listed building, such as the Grade I Sir William Turner’s Hospital at Kirkleatham, has strict rules, and even a modest house in a conservation area may be affected. Ask the council before you change old plaster.
Grouped by council, which is who to ask about listed buildings and conservation areas. Distances are in miles, in a straight line from the town centre.
Skimming puts a thin finish coat, about 2 to 3 mm, over a sound surface. Replastering takes off the old plaster and applies a backing coat and a finish. The wall problem tool on this page helps to tell which one you need.
A skim coat usually needs several days before a first thin mist coat, and a thick backing coat can take weeks to dry fully. The drying tool on this page gives the dates for your own start day.
It depends on the area and the thickness. The quantity tool on this page gives the weight and the number of 25 kg bags with 10% extra.
Textured coatings put on before 2000 can contain asbestos. Do not sand or scrape one. Have a sample tested, and ask a plasterer about skimming over it once the result is known.
Fine hairline cracks are often shrinkage, from plaster drying too fast or a coat applied too thin. Wider cracks along a joint or from a corner may be movement in the building. A plasterer can tell which.
Not until the cause is found and put right. Plaster on a damp wall blows or stains, and salts can come back through it. A damp survey comes first, then the replastering.
Yes, but the plaster should suit the wall. Lime plaster is used on lime walls, so that the wall can still breathe. Tell the plasterer if the house is listed or old.
30 places around Redcar are listed on this page, from Marske and Saltburn to Guisborough, Middlesbrough and Stockton. Put your postcode in the form to check that you are covered.
A question before you ask for a quote? Write to us and we will reply by email.